The USOC number of the jack to be installed is RJ11C
(or RJ11W for a wall plate jack).
Installation
during shipment and is not necessary for use.
Selecting a Location
You can place the phone’s base on a desk or table, or mount it on
near an accessible AC outlet
near a telephone line jack
out of the way of normal activities
away from electrical machinery, electrical appliances,
and room monitors
away from other cordless phones
If your home has specially wired alarm equipment
connected to the telephone line, be sure that
installing the system does not disable your alarm
equipment.
If you have questions about what will disable
alarm equipment, contact your telephone company
or a qualied installer.
•
•
The base’s location affects the handset’s range. If you have a
choice of several locations, try each to see which provides the
best performance.
Your telephone connects directly to a modular telephone line jack.
If your telephone wiring does not have a modular jack, you can
update the wiring yourself using jacks and adapters (available at
your local RadioShack store), or have the telephone company
update the wiring for you. You must use compatible modular
jacks that are compliant with Part 68 of FCC Rules.
•
•
•
•
•
To Next Page
Loading...
