Setting the Day and Time
1. Press MENU/SET
on the base.
2. Press MENU/SET
“Time”, the current time and the voice guidance for setting the
time.
3. Press
SELECT/ or SELECT/ to select the day of the week,
and then press MENU/SET.
01-12) to set hour, and then press
MENU/SET
.
00-59) to set minute, and then press
MENU/SET
.
6. Press
SELECT/ or SELECT/ to choose AM or PM, and then
press MENU/SET
If you make a mistake while entering the hour or
minute, use (delete) to erase the wrong number
and then enter the correct number.
Adjusting the Base Display (LCD Contrast)
You can adjust the contrast or brightness of the text that appears
on your base display. Choose one of ten levels for optimum
viewing.
1. Press MENU/SET
on the base.
2. Press
SELECT/ to move the pointer to select LCD
CONTRAST and then press MENU/SET.
3. Press
SELECT/ or SELECT/ to adjust the contrast of the
base display.
4. Press MENU/SET
To Next Page
Loading...
