2. Press SELECT/
and then press MENU/SET.
3. Press
SELECT/ or SELECT/ to select a Ring Time (TOLL
4. Press MENU/SET
Activating the Message Alert
The Message Alert feature sounds a short alert tone every 15
seconds whenever you have a new message. Once all new
messages have been played, the alert tone automatically stops
beeping until you receive another new unplayed message.
1. Press MENU/SET
on the base.
2. Press
SELECT/
MENU/SET.
3. Press
SELECT/ or SELECT/ to select ON or OFF.
4. Press MENU/SET
To quickly turn off the Message Alert tone, press any key on
the base unit; the tone will automatically quiet until you receive
another new message.
Setting Your Greeting
When you receive a call, the answering machine automatically
plays either the pre-recorded message or your own greeting.
Your answering machine comes with the following pre-recorded
“Hello, no one is available to take your call. Please leave a
message after the tone.”
Or you can record your own personal outgoing greeting. Your
long. Once you have recorded a personal greeting, you can
switch back and forth between the pre-recorded greeting and
your own personal greeting.
To Next Page
Loading...
