Call Waiting
If you subscribe to Call Waiting service, you can receive calls
while on the line.
1. If a call comes in while you are on the phone, you will hear a
call waiting tone. If you have CIDCW activated, you will see
the name and number of the incoming caller.
2. Press
FLASH on the base or cordless handset to accept the
waiting call. After a short pause, you will hear the new caller.
3. To return to the original caller, press
FLASH on the base or
handset again.
You must subscribe through your local telephone
company to receive Call Waiting service.
Adjusting the Ringer, Earpiece and Speaker
Volume
Adjusting the Base Ringer
Ringer on/off: The RINGER ON/OFF switch allows you to set the
base ringer on or off. If you set the switch to off, the base ringer
will be silent.
Ringer tone: Press the RINGER TONE button in standby to select
one of seven ring tones.
Ringer volume: The base has ten settings for ringer volume.
1. With the phone in standby, press
SELECT/ or SELECT/ .
2. The base will sound the ringer volume at the selected setting
and display the new ringer volume.
Adjusting the Handset Ringer
Your cordless handset has two different ring tones (A and B) and
two different volumes for each (low and high).
To Next Page
Loading...
