11
Follow these steps to connect an AC adapter.
1. Insert the AC adapter’s barrel plug into the
DC 9V
jack on
the back of the system.
2. Plug the other end of the AC adapter into a standard AC
outlet.
RESETTING THE SYSTEM
Before you use the system the
first time or to reset the sys-
tem’s clock any time, use a
pointed object, such as a
straightened paper clip, to
press
RESET
on the back of the
system.
12-00
and
A
appear.
Note:
If the system does not work after you reset it, remove
the batteries, disconnect the system from the phone line and
the AC outlet, replace the batteries with fresh ones (if neces-
sary), then reconnect it and try resetting it again.
43-959.fm Page 11 Monday, August 16, 1999 3:26 PM
To Next Page
Loading...