15
SETTING THE LANGUAGE
You can set the system to display messages in English,
French, or Spanish.
1. Repeatedly press
MODE
until the system displays
CALLER ID MODE
.
2. Press either
REVIEW
button. The system displays the
total number of stored calls.
3. Refer to the following table to select the language
Note:
If the system is set to a language other than English, the
first time you do Step 3 the language changes to English. Sim-
ply do Step 3 again to select the language you want to use.
To Select: Press and hold for 6 seconds:
English Both
REVIEW
buttons.
French
REVIEW
Spanish
REVIEW
t
t
43-959.fm Page 15 Monday, August 16, 1999 3:26 PM
To Next Page
Loading...