13
CONNECTING TO A TWO-LINE PHONE
To record information about calls received on a two-line
phone, you can connect two systems using a triplex adapter
(Cat. No. 279-402). Each system only records information
about calls received on the line to which it is connected.
Follow these steps to connect two systems to a two-line
phone.
1. Unplug the existing telephone’s modular cord from the
modular jack and plug it into
L1 + L2
on the triplex
adapter.
2. Plug the triplex adapter into the modular jack.
3. Plug one end of the supplied modular cord into the
TEL.
LINE
jack on one of the systems.
4. Plug the other end of the modular cord into either
L1
or
L2
on the triplex adapter.
5. Repeat Steps 3 and 4 to connect another system to the
remaining open jack (
L1
or
L2
) on the triplex adapter.
43-959.fm Page 13 Monday, August 16, 1999 3:26 PM
To Next Page
Loading...