Radio Shack Chronomatic-300 User Manual

Chronomatic-300 AM/FM clock Radio with Telephone
(120-1602) Preparation Faxback Doc. # 18691
SELECTING A LOCATION
You can use your phone as a desk phone, mount it on a wall plate, or mount
it directly on the wall. Choose a location that is not in the way of
normal activities, is near a phone jack, and produces the best AM radio
sound.
If your telephone wiring does not have a modular jack, you can update the
wiring yourself. Your local Radio Shack store sells the jacks and adapters
necessary to convert from older wiring methods to modular wiring.
Or you can have the telephone company update the telephone wiring for you.
NOTES: The telephone company charges to install the necessary jacks.
The telephone company might ask you for the USOC number of the
jacks to be installed. This number is RJ11C (or RJ11W for a wall
plate installation).
CONNECTING TO AC POWER
Plug the power cord into a standard AC outlet.
SETTING THE DISPLAY BRIGHTNESS
Set DIMMER HIGH/LOW to the desired display brightness.
SETTING THE CLOCK
Follow these steps to set the clock.
1. Press and hold down TIME.
2. While holding down TIME, repeatedly press or press and hold down HOUR
until the hour setting is correct.
NOTE: The PM indicator lights for PM hours.
3. While holding down TIME, repeatedly press or press and hold down MINUTE
until the minute setting is correct.
4. Release TIME.

Radio Shack Chronomatic-300 Specifications

General

Brand	Radio Shack
Model	Chronomatic-300
Category	Clock Radio
Language	English