12
2. Insert the hooks into the slots and gently push the CID-932
down on the bracket to snap the bracket onto the CID-932.
To remove the bracket, firmly hold the CID-932 and pull up on
the top of the bracket.
Mounting on a Wall
To mount the CID-932 on a wall, you need two screws (not sup-
plied) with heads that fit into the keyhole slots on the back of the
CID-932.
1. Use the supplied template to mark the
mounting screw locations on the wall.
Then drill a hole in the wall at each
marked location.
2. Insert a screw into each hole, letting the
head extend
1
/
8
inch from the wall.
3. Connect the CID-932. See “Connecting
the CID-932” on Page 13.
4. Align the keyhole slots on the CID-932 with the screws and
slide it down.
OFFOFF
SPEAKERSPEAKER
O
N
ON
1
/
8
"
43-932.fm Page 12 Wednesday, January 12, 2000 9:56 AM
To Next Page
Loading...