Radio Shack CID-932 - Setting the Time and Date

15
SETTING THE TIME AND DATE
The time and date are automatically set when the CID-932 first
receives a call. Subsequently, each incoming call automatically
updates the time and date.
To change the time and date follow these steps.
1. Hold down
REVIEW
8
and
9
for about 6 seconds until
the hour segment flashes.
2. Press
REVIEW
8
or
9
to change the hour digit.
3. Press
DELETE
to confirm. The minute digits flash.
4. Repeat Steps 2–3 to set the minutes, day, and month.
The display returns to standby and the CID-932 is ready to re-
ceive calls.
43-932.fm Page 15 Wednesday, January 12, 2000 9:56 AM