Radio Shack Digital Recorder - Connecting Recorder to PC

34
%100'%6+0)"6*'"
4'%14&'4"61";174"
2%
Connect the recorder to your
PC by plugging one end of the
supplied USB cable into the
USB PORT
on your recorder
and the other end of the cable
to your PC (refer to your PC’s
owner’s manual for the
location).
On Windows XP,
<ekdZýD[mý
<ekdZýD[mý<ekdZýD[mý
<ekdZýD[mý
>WhZmWh[ýM_pWhZ
>WhZmWh[ýM_pWhZ>WhZmWh[ýM_pWhZ
>WhZmWh[ýM_pWhZ
appears to
prompt you to install Reset
Driver. Confirm that
Install the
software automatically
(
H[Yecc[dZ[Z
H[Yecc[dZ[ZH[Yecc[dZ[Z
H[Yecc[dZ[Z
) is selected and
follow the instructions to install
the driver. After the Reset
Driver is installed,
<ekdZýD[mý
<ekdZýD[mý<ekdZýD[mý
<ekdZýD[mý
^WhZmWh[ýM_pWhZ
^WhZmWh[ýM_pWhZ^WhZmWh[ýM_pWhZ
^WhZmWh[ýM_pWhZ
appears again
to prompt you to install USB
Flash memory Controller.
Confirm that
Install the software
automatically
(
H[Yecc[dZ[Z
H[Yecc[dZ[ZH[Yecc[dZ[Z
H[Yecc[dZ[Z
) is