3
MW Step Setting — lets you choose
the correct setting for whatever part of
the world you are in.
AM RF Gain Control — lets you ad-
just the receiver’s sensitivity when you
listen to SW to provide the best possi-
ble reception.
Narrow/Wide Control — lets you re-
duce interference from other stations
when you listen to SW, MW (AM), and
LW broadcasts.
BFO Controls — let you tune to sta-
tions that transmit in continuous wave
(CW) and single sideband (SSB).
Built-In Cassette Recorder — lets
you record and play back programs.
Standby Recording — lets you record
your favorite program at a preset time.
Beat Cut Switch — reduces the hum
or whistling sound sometimes heard
when recording AM broadcasts.
Built-In Condenser Microphone —
lets you make live recordings.
Three Power Options — let you
choose from internal batteries, stan-
dard household AC power (requires an
AC adapter), or DC vehicle battery
power (requires a DC adapter) so you
can use the receiver just about any-
where.
Battery Power Indicator — lets you
know when the batteries need to be re-
placed.
Back-Up Battery Power — keeps the
clock running, protects the stations
stored in memory, and powers the dis-
play if the receiver’s primary power
source is interrupted.
Memo Pad — lets you record helpful
information such as the memory loca-
tion numbers of your favorite stations.
We recommend you record the serial
number of your receiver here. The
number is inside the battery compart-
ment.
Serial Number_________________
20-219.fm Page 3 Wednesday, August 4, 1999 9:23 AM
To Next Page
Loading...
Need help?
General
