5
Features
Power Failure Alarm —
triggers an external device when both
AC power and a backup DC power limited source (if one is con-
nected) are off.
GENERAL INFORMATION
Note:
Some insurance companies provide a discount for homes
protected by properly installed security and fire alarm systems.
Check with your insurance carrier for requirements.
Your Invisible Beam Entry Alert is designed to conform to feder-
al regulations. To avoid problems, we urge you to read this
manual completely before you install or use the alert.
This alert is for indoor use only.
This product is UL-listed to standard number UL639 for Intru-
sion Detection Units, and should only be used with UL-listed ac-
cessories.
You need the following additional items (available at your local
RadioShack store) to install a complete Invisible Beam Entry
Alert system:
• External siren
• Phillips screwdriver
• Type CL2, 22-gauge wire
• 12-volt DC power limited source
This manual helps you plan and select the required items. Your
local RadioShack store carries additional security items you can
use with the alert.
To Next Page
Loading...