41Troubleshooting
CARE
To enjoy your MIDI Keyboard for a long time:
• Keep the keyboard dry. If it gets wet, wipe it dry immediately.
• Use and store the keyboard only in normal temperature environments.
• Handle the keyboard gently and carefully. Do not drop it.
• Keep the keyboard away from dust and dirt.
• Wipe the keyboard with a damp cloth occasionally to keep it looking new.
Modifying or tampering with the keyboard’s internal components
can cause a mal-
function and might invalidate its warranty and void your FCC authorization to operate
it
. If your keyboard is not performing as it should, take it to your local RadioShack
store for assistance.
No sound when receiving
and playing MIDI data.
MIDI cables are not con-
nected properly.
Check the connection.
The key or tuning does
not match when playing
along with another MIDI
instrument.
The tuning or transpose
parameter is set to a value
other than
0
or
00
.
Set the tuning or transpose to
0
or
00
.
Bass notes in General
MIDI data are sent out
one octave lower.
Tone map parameter is set
to
N
.
Set the tone map parameter to
G
(see “Changing MIDI Settings”
on Page 37).
Sounds sent to another
MIDI device by the key-
board do not sound cor-
rect.
The other device’s MIDI
THRU function is turned
on.
Turn off the MIDI THRU function
on the other device.
Trouble Possible Cause Remedy
To Next Page
Loading...
