15
Number Keys — each key has a sin-
gle digit with a range of numbers print-
ed above it. The single digits are used
to enter the number of a channel or
frequency. The range of numbers (21–
40, for example) indicates the chan-
nels that make up a memory bank.
See “Understanding Channel-Storage
Banks” on Page 17.
• — enters a decimal point when you
set a frequency.
E —
enters the frequency when you
program channels.
s
and
t
— select the search direction.
SCAN
— scans through programmed
channels.
MANUAL
— stops scanning and lets
you directly enter a channel number.
PROGRAM
— programs frequencies
into channels.
MONITOR —
accesses the 10 monitor
memories. See “Moving a Frequency
from a Monitor Memory to a Channel”
on Page 23.
DELAY
— programs a 2-second delay
for the selected channel and turns on
or off the delay during a limit or direct
search or weather scan.
LOCKOUT-S/S
— lets you lock out a
selected channel, or skip a specified
frequency during a limit or direct
search.
FREQ/CHAN-LOCK
— selects the rota-
ry tuner’s mode — frequency tuning,
channel tuning, or locked.
Rotary Tuner — turn to tune through
channels or frequencies. Turn the ro-
tary tuner faster to increase the tuning
speed.
20-418.fm Page 15 Wednesday, August 4, 1999 12:42 PM
To Next Page
Loading...
