EasyManua.ls Logo

Radio Shack PRO-2050 - Primary Usage; Band Allocation

Radio Shack PRO-2050
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
40
Primary Usage
As a general rule, most of the radio ac-
tivity is concentrated on the following
frequencies:
VHF Band
UHF Band
Note:
Remote control stations and mo-
bile units operate at 5 MHz higher than
their associated base stations and re-
lay repeater units.
BAND ALLOCATION
To help decide which frequency rang-
es to scan, use the following listing of
the typical services that use the fre-
quencies your scanner receives.
These frequencies are subject to
change, and might vary from area to
area. For a more complete listing, re-
fer to the Police Call Radio Guide in-
cluding Fire and Emergency
Services,” available at your local Ra-
dioShack store.
AbbreviationsServices
BIFCBoise (ID) Intera
g
ency Fire Cache
BUSBusiness
CAPCivil Air Patrol
CBCitizens Band
CCACommon Carrier
CSBConventional Systems
CTSBConventional/Trunked Systems
Activities Frequencies
Government, Police, and Fire 153.785–155.980 MHz
Emergency Services 158.730–159.460 MHz
Railroad 160.000–161.900 MHz
Activities Frequencies
Land-Mobile “Paired” Frequencies 450.000–470.000 MHz
Base Stations 451.025–454.950 MHz
Mobile Units 456.025–459.950 MHz
Repeater Units 460.025–464.975 MHz
Control Stations 465.025–469.975 MHz
20-430.fm Page 40 Wednesday, August 4, 1999 1:29 PM

Table of Contents

Other manuals for Radio Shack PRO-2050

Related product manuals