Understanding the Display
Row 1
– Signal Stalker II search is active.
BANK –
Appears with numbers (1–10) to indicate
the scan bank. The bar under the bank number shows
banks that are turned on for scanning.
– Keypad locked.
Row 2
WX – Searching weather channels.
MAR –
Searching the marine bank.
FD/PD –
Searching the fire/police bank.
AIR –
Searching the aircraft bank.
HAM –
Searching the amateur radio bank.
Row 3
– Skywarn channel active.
000
– Channel number the scanner is tuned to.
CH –
Appears with channel number (
1
–
200
) or
P
(priority channel).
000.0000
– Frequency the scanner is tuned to.
B
– Batteries are low.
L/0
– A locked out channel/frequency is manually
selected or reviewed.
Row 4
e d (Up/Down) – Search or scan direction.
SRCH –
Searching a service bank.
SCAN –
Scan mode.
MAN –
Manual mode.
PGM –
Program mode.
PRI –
Priority feature is active.
DLY –
Two-second delay is active.
Additional Display Messages
ALL CH L-out
– All channels locked out during scan
or marine band search .
b X Ch-FULL
– All displayed bank channels are full.
b X StorE
– Frequency programmed into displayed
bank’s channel.
CLOnE
– Clone mode.
-dUPL-
– Frequency is already stored in another channel.
Error
– Entry error.
FLo ALL-CL
– All the locked-out frequencies
removed during a FD/PD, AIRCRAFT, HAM, or Signal
Stalker II search.
L-r
– Review the locked-out frequencies.
L-O Fr-FULL
– Maximum of 50 frequencies already
locked out.
oFF tonE
– Key tone deactivated.
On tonE
– Key tone activated.
P
– Scanner is tuned to the priority channel.
-t-
– Tune mode.
Sub Bank Messages
Lo VHF
– Sub-bank 1 of the fire/police bank.
Hi VHF
– Sub-bank 2 of the fire/police bank.
UHF
– Sub-bank 3 of the fire/police bank.
10 M
– Sub-bank 1 of the HAM bank.
6 M
– Sub-bank 2 of the HAM bank.
2 M
– Sub-bank 3 of the HAM bank.
70CM
– Sub-bank 4 of the HAM bank.