26
To release hold and continue searching, press
HOLD
or hold
down t or s for more than 1 second.
Notes:
• To step through the frequencies while
HOLD
is displayed, press
t or s.
• If you tune to a search skip frequency,
L/O
appears (see
“Search Skip Memory” on Page 27).
• To store a frequency into a channel while the frequency is
paused or held, see “Storing Active Frequencies” on Page 27.
Searching from a Selected Frequency
If you do not have a reference to frequencies in your area, you can
search for transmissions starting with a frequency you select.
1. Press
MAN
.
2. To start the search from a frequency, enter it using the number
keys and
CLEAR/
•
. Or, to start the search from a frequency stored
in a channel, enter the channel number, then press
MAN
.
3. Press t to search downward or s to search upward from the
selected frequency.
-d-
,
SEARCH
, and t or s appear.
4. When the scanner stops on a transmission, quickly press either:
• t or s to continue searching
•
HOLD
to stop searching so you can listen to the transmission.
HOLD
appears.
To release hold and continue searching, press
HOLD
or hold
down t or s for more than 1 second.
MHz
SEARCH
RACE
MAN
PROG
BAND
SCAN
HOLD
DATA
12
3
1-10
11-20
21-30
H/S
S/S
4
56
31-40
41-50 51-60
PRIORITY
L-OUT
DEL
7
8
9
61-70 71-80 81-90
0
E
91-100
KEYLOCK CLEAR
WX
20-513.fm Page 26 Wednesday, August 4, 1999 2:39 PM
To Next Page
Loading...
