Need help?Do you have a question about the Radio Shack HTX-420 and is the answer not in the manual?
Frequency| 2-Meter TX frequency range | 144–148 MHz |
|---|---|
| 2-Meter RX frequency range | 137–174 MHz |
| 70-cm TX frequency range | 438–450 MHz |
| 70-cm RX frequency range | 420–512 MHz |
| Air Band frequency range | 108.000-136.9875 MHz |
| Weather Band channels | CH1–CH7 |
Operating Environment| frequency stability | ± 10 ppm |
|---|---|
| operating temperature range | 14° to 140° F (–10° to 60° C) |
| operating voltage range | DC 5 V to 13.8 V |
Receiver| circuit type | Dual Conversion, Superheterodyne |
|---|---|
| 1st IF frequency | 45 MHz |
| 2nd IF frequency | 450 kHz |
| sensitivity | 0.2 µV For 12dB Sinad |
| distortion | 5% Max |
| S/N ratio | 34 dB Min. |
Transmitter| power output at DC 7.2 V | 3 W |
|---|---|
| power output at DC 13.8 V | 4 W |
| distortion (nominal) | 3% |
| deviation | ± 5 kHz Max. |
| S/N ratio | 32 dB |
| current drain at DC 7.2 V | 1200 mA |
| current drain at DC 13.8 V | 1500 mA |
Weight and Dimensions| weight with rechargeable battery | 11.46 oz (325g) |
|---|---|
| dimensions (HWD) | 4[1]/2 × 2[2]/5 × 1[1]/5 (122 × 61 × 31 mm) |
| impedance | 50 ohm |
Details dual-band, 5W output, DTMF, 100 memories, CTCSS, and scanning functions.
Covers meters, repeater offset, and compact design benefits.
Explains button abbreviations, key combinations, and display indicators used in the manual.
States the device's compliance with FCC rules regarding interference.
Provides guidance on obtaining a license and joining the amateur radio community.
Details using internal batteries, AC power, and vehicle battery power options.
Explains connecting antennas, belt clips, wrist straps, and microphones/speakers.
Illustrates and explains the various icons and indicators on the transceiver's display.
Covers turning on/off, channel/volume, bands, monitor, and set mode functions.
Details memory, scanning, CTCSS, DTMF, and other special feature operations.
Lists frequency ranges, voltage, dimensions, and weight.
Provides specific technical data for receiver sensitivity and transmitter output.
To Next Page
