BG TECH.
VERSION III
2001/2/28
6. Do the same way of 4. and 5.
7. After entering AREA code, press or PTT key to go to VFO mode.
à Data re-entry
1. Select the address to modify.
2. Enter the desired code.
- Once area code is entered, WX SAME mode works only area code is matched.
- If there is no data in A9, ------ appears.
WX-SAME : Weather SAME Mode On/Off
When you select WX SAME mode on or off pressing up/down arrow key, press
to save and exit. (If mode is On, umbrella icon will appear when the radio is
tuned in weather channel.)
Display: Main : OFF-ON, Sub : SAME.
REPEATER OPERATION
Press “F” + “+/-“ to select +. -, or OFF.
If main frequency display shows 144.000 for instance, sub frequency display shows +600.
When “REV” is pressed, “+” will be changed to “-“. On pressing “PTT”, sub frequency display
shows – 600.
If frequency is out of the amateur band, error tone sounds.
To Next Page
Loading...
