BG TECH.
VERSION III
2001/2/28
OPERATION
TURING ON /OFF THE TRANSCEIVER
To turn the transceiver, hold down “PWR” key for about 0.5 second. The radio beeps once if the key
tone feature is enabled. Then the current battery voltage briefly appears and the last used frequency
appears. To turn the transceiver off, press “PWR” key again.
CHANGING THE CHANNEL/FREQUENCY UP/DOWN
To change the channel or frequency, turn the rotary switch on the top. If you turn clockwise, channel
or frequency goes up. If you turn counterclockwise, channel or frequency goes down.
Also you can use the universal type keys to turn up/down.
F + are pressed to step through the frequencies in 1MHz steps
(144, 145, 146)
Also, you can enter the frequency you want to use directly pressing 16 keys.
CHANGING THE VOLUME UP/DOWN
To change the volume, turn volume switch under the channel switch clockwise for up or counter
wise for down.
CHANGING THE BANDS
To change the band you want to use, press and it will turn VHF, UHF, AIR BAND, WX.
USING MONITOR BUTTON
To temporarily open the squelch, hold down “M”. To resume normal operation, release M.
While “M” is pressed, SQL, RPT, RXTONE, TXTONE is displayed on the sub frequency display
and its value on the main frequency.
To Next Page
Loading...
