10
OPERATION
1. Turn on the TV and set it to either channel 3 or 4,
whichever of the two is not used for regular broad-
casts in your area.
2. Set the RF Modulator’s
CHANNEL 4/3
switch to the
same channel you set on the TV (3 or 4).
3. To select the VHF source (cable TV or antenna)
connected to the RF Modulator’s
ANT IN
terminal,
set
MOD/ANT
to
ANT
.
To select the audio/video source (VCR or video
camera) connected to the RF Modulator’s
AUDIO IN/
VIDEO IN
terminals, set
MOD/ANT
to
MOD
.
(illus)
15-1283.fm Page 10 Thursday, July 15, 1999 2:19 PM
To Next Page
Loading...