16
3. If you are transmitting to nearby units, press
H/L
to set the output power to low output power, if
necessary. appears on the display.
If the other transceiver is farther away or the
receiving person complains of noise, press
H/L
again to set it to high output power. disap-
pears from the display.
4. To turn off the transceiver, turn
VOLUME
counter-
clockwise until you hear it click.
TURNING ON/OFF THE LIGHT
Press
LIGHT
to turn on and off the display’s light. If
you do not turn the light off manually, the light auto-
matically shuts off in 5 seconds.
LO
illustration
LO
illustration
21-1678.fm Page 16 Thursday, August 5, 1999 12:45 PM
To Next Page
Loading...
