17
LOCKING THE FUNCTIONS
Use the
KEY LOCK
switch to lock the transceiver’s
functions (except the talk button and
LIGHT
) to pre-
vent accidental program changes. Press
KEY LOCK
so appears on the display.
To release the lock, press
KEY LOCK
again.
disappears from the display.
USING CHANNEL 9
For emergency call monitoring or transmitting on
Channel 9, just press
CH-9
.
9
and appear on the
display.
Important!
Channel 9 is reserved for motorist assis-
tance and for reporting emergency information about
accidents, hazardous road conditions, and so on. Al-
ways give emergency messages priority on Channel
9.
To release the transceiver from Channel 9, press
CH-
9
again. The previously selected channel number ap-
pears on the display.
Note:
The
KEY LOCK
,
WEATHER
, and
CHANNEL
but-
tons do not work when
CH-9
is pressed.
LOC
illustration
LOC
EM
illustration
21-1678.fm Page 17 Thursday, August 5, 1999 12:45 PM
To Next Page
Loading...
