11
TRANSMITTING
Note:
We recommend you try receiv-
ing before you transmit.
1. Follow Steps 1–5 in “Turning On
the CB and Receiving Transmis-
sions” on Page 10.
2. Hold down
PUSH TO TALK
and
speak into the microphone in a
normal voice from about 2–3
inches away. The orange TX
indi-
cator lights.
Note:
Do not speak too loudly
when transmitting. It does not
make your signal any stronger,
and might distort your transmis-
sion.
3. When you finish transmitting, re-
lease
PUSH TO TALK
. The TX indi-
cator turns off. The TRC-442 can
now receive transmissions.
4. To turn off the CB, turn
VOLUME
counterclockwise until it clicks.
21-1586.fm Page 11 Thursday, August 5, 1999 9:50 AM
To Next Page
Loading...
