9
OPERATION
Caution
: Do not use your CB before
you connect it to an antenna.
Before you start using your CB, you
should know how to use it effectively
and courteously. See “CB Courtesy”
and “Using 10-Codes.”
RECEIVING
TRANSMISSIONS
Note
: You must connect the micro-
phone to your CB or it will not re-
ceive.
1. Set
VOLUME
to
MIN
.
2. To turn on the CB, press
POWER
to the
position. The
CHANNEL display shows the
last channel used.
3. Turn
RF GAIN
to
HIGH
(fully
clockwise).
4. Turn
SQUELCH
to
MIN
(fully
counterclockwise) so you can
hear background noise (hiss).
5. Adjust
VOLUME
to a comfort-
able listening level.
6. Rotate
CHANNEL
to the right to
increase the channel number, or
to the left to decrease the chan-
nel number. The SIGNAL
meter
shows the strength of the incom-
ing signal.
21-1579.fm Page 9 Thursday, August 5, 1999 9:34 AM
To Next Page
Loading...
