Radio Shack TRS-80 DT-1 User Manual

___ DI'_-_l TRS-eO ® Own_e_r_'_s_Man __ ual _
ALF
Autœa.tic Line Feed Select
~ = CR
l = CR/LF
This switch selects the code(s) supplied by the Dr-l when
<EN'rER> is pressed. When set to ~, pressing <ENTER> sends
only a carriage return to the Host. "Wœn set to l, bath a
cardage return and a line feed are sent when you press
<EN'rER>. Use the setting your Host requires.
AWP
Autœa.tic Wl:'ap-Around select
~ = No Wrap
l
= Wrap
If this swi tch is set to l, the Cursor will nove to the next
line when the end of a line is reached on the SCreen. If
set to ~, the Cursor will not nove down and back to the left
unti l <ENTER> is pressed.
F/H
Full- or Half-1).lplex select
~ = Full
l = Half
set this switch to ~ (Full-Duplex) if the Host echos
characters typed on the ar-l.
If this switch is set to l (Half-Duplex), characters typed
on the lJI'-1 are displayed on the DI'-l' s Screen.
If you set the Dr-l to half-duplex and the Host is echoing
the character, you will see two of each character on the
SCreeni one character will be from the lJI'-1 and the other
echoed from the Host.
If this happens and you want to see only one character,
simply set the switch for full-duplex operation.
---------lIadle/haell---------

Radio Shack TRS-80 DT-1 Specifications

General

Brand	Radio Shack
Model	TRS-80 DT-1
Category	Desktop
Language	English