Radio Shack TRS-80 DT-1 User Manual

___ DI'_-_l TRS-aO ® Own_e_r_'_s_Man __ ual _
Storing r/o Paraueters
When you' ve set up the 1/0 pararreters you need, you can
either store them "perrranently" or "terrporarily".
"Perrranent" storage Iœans that the DT-l will store these
pararœters in rœrrory. These sarre pararœters will be
used the next time you turn the Termnal on.
"Ternporary" storage Iœans that the DI'-l will use the
pararœters only while the TerIIÙ.nal is on; any new
pararœters will be lost when the Termnal is turned off.
When the ])1'-1 is turned on again, the TerIIÙ.nal will use
whatever "perrranent" pararœters are in the TerIIÙ.nal' s
rœm:>ry.
To store 1/0 pararœters perrranently:
1. When you' ve established the para.rn=ters you need,
press <ENTER>.
2. The ])1'-1 will ask if you want to store the paraueters
perrranently. Press <y> (yes).
3. The ])1'-1 will display the Iœssage SEI'-UP S'IDRED.
4. Press the key-combination of <crRL> <SHIFI'> <ENTER> to
leave the set-up rrode.
As saon as you press <crRL> <SHIFI'> <ENTER>, the M::mu
will disappear, the buzzer will sound, and the Cllrsor
will return to the Horre position.
Ta store 1/0 pararœters terrporarily:
1.When you've established the pararreters you need,
press <ENTER>.
2. The ])1'-1 will ask if you want to store the pararœters
perrranently. If you do not want to, press any key
except <y>.
3. The ])1'-1 will display the message SEI'-UP NOT S'IDREO.
4. Press the key-combination of <crRL> <SHIFr> <ENTER> to
leave the set-up rrode.
----------Itadle/haell---------
- 31 -

Radio Shack TRS-80 DT-1 Specifications

General

Brand	Radio Shack
Model	TRS-80 DT-1
Category	Desktop
Language	English