Radio Shack TRS-80 DT-1 - Control Code Sequences; Special Functions (Video;Restart)

IY.r-1
Owner 's Manual
----------- TRS-BO ® -----------
Control Codes.
Tc get into Control Code Sequences/Local M::>de, use the
key-combination of:
<SHIFT> <CI'RL> <ESC>
Ali three keys rrust be held down at the sane tilœ, and then
releasedi then press the <CTRL> key. For example, ta ring
the beU, press:
<~IFr> <~~><ESC> <CTRL><~
Special Functions
<ESC> <b>
Reverse video
The reverse of the set-up Paraneters will be used. For
exarrple, if you chose Norrœ.l (White on Black) video in the
8et-Up Paraneters, then <ESC> <b> will reverse that setting
and you will see black letters on a white screen.
If you chose Reverse (Black on White) video in. the set-up
pararœters, then <ESC> <b> will cause Norrœ.l Video (White on
Black) ta be used.
<ES::> <d>
Normù video
Use the 8et-Up Paraneters for video Display (used after
<ESC> <b> above).
<SHIFI'> <BREAIO
Software Restart
This key-cornbination causes a software reset (also called a
"warm
restart"). IY.r-1 Input/OUtput paraneters are reset ta
the perrranent settings, and a CONTROL Q is sent ta the Host
sa that it can continue.
---------Itadle/haell---------
- 35 -