REPAIR
(REPAIR/CMD)
IREPAIR :drlve
Utility
I
Updates and modifies information on floppy disks produced on other
Radio Shack operating systems and computers so TRSDOS Version
6 can use them.
drive is any floppy drive currently enabled
in
the system (except
Drive
0).
After REPAIR
is
complete, you should be able to copy any file off the
modified diskette.
Use REPAIR to read any disk formatted by any disk operating system
other than TRSDOS Version
6,
LDOS 5.1.3, or their successors.
Once a disk is modified by TRSDOS, the operating system that
created it may not be able to read
it.
TRSDOS 1.2 and 1.3 disks should NEVER
be
repaired. Use the
CONV utility
to
copy programs from them.
Using REPAIR, you can convert the following list of operating system
diskettes to TRSDOS Version
6 diskettes:
• Model I TRSDOS
2.O,
2.1, 2.2, 2.3, 2.3a
Examples
RE
PA
I R : 1
(ENTER)
updates information on the diskette
in
Drive 1 so that TRSDOS can
use
it.
1-105
To Next Page
Loading...
