TRSDOS Error Messages
Attempted
to
read
locked/deleted
data
record
(Error 7, X'0T)
Check for an error
in
your application program.
Attempted
to
read
system
data
record
(Error
6,
X'0S')
Check for an error
in
your application program.
Data
record
not
found
during
read
(Error 5, X'05')
Try the operation again.
If
it fails, use a different disk. Reformat the
old disk; this should lock out the flaw. To retrieve your files from the
flawed disk, perform a backup by class (see the
BACKUP
command).
You may have to remove the files that have errors so
BACKUP
will
work.
Data
record
not
found
during
write
(Error 13, X'0D')
Try the operation again. If it still fails, use a different disk.
Device
in
use
(Error 39, X'2T)
RESET the device
in
use before REMOVEing
it.
Device
not
available
(Error 8, X'08')
Make sure you enter the correct device specification and that the
device peripheral
is
ready. You can use the DEVICE (B = ON)
command to display all devices available to the system.
Directory
full -
can't
extend
file
(Error 30, X'IE')
All directory slots are being used. Use BACKUP to copy some of the
disk's files to a newly formatted disk.
Directory
read
error
(Error 17, X'
11
')
Try the operation again, using a different drive. If it fails, use a
different disk. You can try to get the files off a flawed disk by doing a
backup by class.
If
this doesn't work, you must use your backup of
the disk.
Directory
write
error
(Error 18, X'12')
The directory may no longer be reliable. If the problem recurs, use a
different diskette.
A-63
To Next Page
Loading...
