Disk
space
full (Error 27, X'IB')
While a file was being written,
all
available disk space was used. The
file contains only the data written before the error occurred. Write the
file
to
a disk that has more available space. Then, REMOVE the
partial copy
to
recover disk space.
End
of file
encountered
(Error 28,
X'le')
You
tried
to
read past the
end
of file pointer.
Use
the DIR command
to check the size of the file. Check for
an
error
in
your application
program.
Extended
error
(Error
63)
An
error has occurred and the extended error code
is
in
the HL
register pair.
File
access
denied
(Error 25, X'19')
You
specified a password for a file that
is
not password protected or
you
specified the wrong password for a file that is password
protected.
File
already
open
(Error 41, X'29')
Use the RESET library command
to
close the file before trying to
open
it.
File
not
in
directory
(Error 24, X'18')
Check the spelling of the filespec. Use the DIR command
to
see if the
file is
on
the disk.
File
not
open
(Error 38, X'26')
Open the file before trying to access
it.
GAT
read
error
(Error 20, X'14')
Try the operation again, using a different drive.
If
this fails, use a
backup by class
to
move
all
files to a different disk. Then, try the
operation again, using the new disk.
GAT
write
error
(Error 2IX'15')
The Granule Allocation Table may
no
longer
be
reliable.
If
the
problem recurs, try the operation again, using a different drive. If it still
fails, use a different disk.
HIT
read
error
(Error 22, X'16')
Try the operation again, using a different drive.
If
this still fails, use a
backup by class
to
copy the files
to
a different disk.
A-54
To Next Page
Loading...
