No
device
space
available
(Error 33, X'21')
You tried to
8ET
a driver or filter and all of the Device Control Blocks
were
in
use. Use the DEVICE command to see if any non-system
devices can be removed to provide more space.
No
directory
space
available
(Error 26, X'IA')
You tried to open a new file and no space was left
in
the directory.
Use a different disk or REMOVE some files you no longer need.
No
error
(Error
0)
The @ERROR supervisor call was called without any error condition
being detected. A return code of zero indicates no error. Check for an
error
in
your application program.
Parity
error
during
header
read
(Error L X'01 ')
Try the operation again, using a different drive. If it still fails, use a
different disk.
Parity
error
during
header
write
(Error 9, X'09')
Try the operation again, using a different drive. If it still fails, use a
different disk.
Parity
error
during
read
(Error
4,
X'04')
Try the operation again, using a different drive. If
it
still fails, use a
different disk.
Parity
error
during
write
(Error 12, X'0C')
Try the operation again, using a different drive. If it still fails, use a
different disk.
Program
not
found
(Error 31. X'IF')
Check the spelling of the filespec (you must include the /CMD
extension). If this is not the problem, make sure the disk that contains
the file is loaded.
Protected
system
device
(Error 40, X'28')
You cannot REMOVE any of the following devices: *KI,
*00,
*PR,
*JL, *81,
*80.
Record
number
out
of
range
(Error 29, X'ID')
Correct the record number or try the operation again, using another
copy of the file.
A-66
To Next Page
Loading...
