Appendix
L/
Set Up for
50
Hz
AC
power
(non-USA users)
A utility (HERZ50)
is
provided for customers
in
areas where the
AC
power
is
50
Hz
rather than
60
Hz.
It
should not
be
used by any other
customers. HERZ50 simply places a patch
on
the diskette that
changes the clock speed for
50
Hz
users.
HERZ50
is
a DO-file that makes a change
in
the software of
TRSDOS. Only the Drive
0 diskette
is
changed.
Be
sure
it
is
write-enabled before
you
start the DO-file. Once the HERZ50 change
is
done,
it
will remain
in
effect for that diskette.
To
perform the change, type:
DO
HERZ50
Once the change has been made,
you
will need
to
reset the system
to
put the change into effect. This loads the new software into RAM.
A-107
To Next Page
Loading...
