O
WNER
’
S
M
ANUAL
ADJUSTING BRIGHTNESS
The RadioShack 8-in-One Remote has five levels of brightness
adjustment and is set to the fourth one at the factory. To increase or
decrease the brightness, perform the following steps:
1. Press and hold P until the bottom IR segment flashes twice.
The program keys will appear:
NOTE: If the display turns off because of inactivity, you will need to start the
programming sequence again by repeating this step.
2. Press above once.The Brightness Programming screen will appear:
• To increase brightness, press ▲ one or more times.
• To decrease brightness, press ▼ one or more times.
3. When desired brightness is achieved, press twice to exit program-
ming and return to the last-selected device menu screen.
NOTE: The remote includes a tilt switch that turns on the display when the
unit is moved. If desired, you can disable this feature. See “Setting The Tilt
Switch” on page 38.
Adjusting Brightness 13
To Next Page
Loading...
