O
WNER
’
S
M
ANUAL
2. Press below OTHER once. The Other programming screen will appear:
3. Using the number keys, enter 9 9 4.The bottom IR segment will
flash twice.
4. For the source mode,press a desired device key once (i.e.,CBL, SAT,
TV,DVD, AUD, VCR,AUX,or CD). For this example, press TV once. The
selected source device menu screen, including ,will be displayed.
5. For the source key, press a key to be moved once. For this example
press VOL ▲ once.
6. For the destination mode, press a desired device key once (i.e., CBL,
SAT, TV,DVD,AUD, VCR,AUX,or CD). For this example, press DVD once.
The selected destination device menu screen, including , will
be displayed.
7. For the destination key, press a key to be moved once.For this example
press VOL ▲ once.Upon keymoving, the bottom IR segment will flash
twice as confirmation.The program keys will appear again.
8. Repeat steps 2 through 7 two more times to map the remaining
volume control keys, substituting VOL▼ and MUTE as source and
destination keys in steps 5 and 7.
9. Exit programming by pressing once. The display will return to the
last-selected device menu screen.
Upon completion of the above procedure, you can now use your
RadioShack 8-in-One Remote to control the TV’s volume and mute in
the DVD mode, as well as in the TV mode.
RESTORING A SINGLE KEYMOVED KEY
1. Press and hold P until the bottom IR segment flashes twice.
The program keys will appear:
continued on next page...
Using Keymover 29
To Next Page
Loading...
