Radio Shack voice activated Microcassette Recorder - Page 12

12
Operation
• Do not force down
RECORD
when a
cassette erase-protection tab is not in
place. (See “Preventing Accidental
Erasure” on Page 18.)
You can record manually or use VOX
(voice-activated) recording. When you use
VOX, recording begins when the recorder
picks up sound and stops a few seconds
after the sound stops.
1. Load a tape.
2. Set
TAPE SPEED
as follows:
• To double the tape’s recording/
playback time, set
TAPE SPEED
to
1.2
. This setting allows 120 min-
utes of total recording/playback
time on an MC-60 tape, or 180
minutes on an MC-90 tape.
• For better sound quality, set
TAPE
SPEED
to
2.4
(
NORMAL
or
FAST
PLAY
). This setting allows 60 min-
utes of total recording/playback
time on an MC-60 tape, or 90 min-
utes on an MC-90 tape.
3.
To manually start and stop recording
,
set
VOX
to
OFF
.
14-1184.fm Page 12 Wednesday, June 28, 2000 8:53 AM