PG 5
MANUAL Screen The Manual control screen is where you can make temporary
changes to your CT32’s operation. From the HOME screen, touch the main temperature display to
use this screen. This temporary change in target will revert to the programmed target at the next time
slot. [See page 12 for details]
Target
Temperature
Room
Temperature
Return HOME
Temp Up / Temp Down
Touch these to raise and lower
the manual override
EMER
heat for
HEAT PUMP systems.
HOLD
EMER
F
HOLIDAY
AUTO
HOLD
Current temperature
Run HOLIDAY
Program
HEAT
To Next Page
Loading...
