Radio Thermostat CT32 User Manual

PG 7
Run pre-set Program
The CT32 comes pre-programmed with an EPA approved program. This program is recommended
by the EPA for energy efciency. We strongly recommend that you run this program for one week,
and see if it works for you. If it does not t your needs you can always input a custom program.
To run the EPA program, set the mode switch to HEAT or COOL.
Touch the DAY area and advance it to select the present day.
Touch HOME. The unit is now running the program.
All Da
y
s 70
o
F 62
o
F 70
o
6
2
o
F
MORN
6:00am
HEAT
DAY
8:00am
EVEN
6:00pm
NIGHT
10:00pm
All Days 78
o
F 85
o
F 78
o
F 82
o
F
MORN
6:00am
COOL
DAY
8:00am
EVEN
6:00pm
NIGHT
10:00pm
EPA
t
TO CHANGE THE PROGRAM:
Make sure the CT32 mode is set to either HEAT or COOL, touch MENU then touch PROGRAM.
This puts you at the PROGRAM screen [see page 4]. The programmed start time is displayed in
the upper left. The TIME SLOT icon indicates the active TIME SLOT in the default program [MORN,
DAY, EVEN, NIGHT]. The programmed Target Temperature is shown on main display.
The HEAT program and the COOL program are separate.

Radio Thermostat CT32 Specifications

General

Brand	Radio Thermostat
Model	CT32
Category	Thermostat
Language	English