31
Be sure to reset
Press “Enter” key, the symbol “YES” will stop blinking, and return to the initial
screen. Now the model data is reset to the initial setting that is the default value set at
the factory.
Not to reset
Press “Dec(-)” or “Inc(+)” button, the symbol “YES” will stop blinking and the
symbol “NO” will blink, press “Enter” key, the symbol “NO” will stop blinking,
return to the initial screen by pressing “Exit” button twice.
Or you can press “Exit” button twice to quit resetting directly.
CAUTION: Resetting the current model memory will permanently erase ALL
programming information for that model. The data cannot be recovered .Do not reset
the model unless you are certain you want to clear-out that memory and start from
scratch.
Thank you again for using our product, we hope it can bring you happiness!
To Previous Page
Loading...
