RadioMaster TX16S

Important note on Power and charging precautions.
The TX16S has built-in USB charging function for 2cell 7.4v Battery packs (2 x 3.7v Lithium cell packs).
The charging circuit is only suitable for 2x 3.7v lithium-ion 18650, 2 x 21700 3.7v lithium-ion (21700 2s
7.4v Lithium-Ion pack) or 2x 3.7v Lipoly batteries (2s 7.4v Lipo battery pack). The nominal battery
voltage per cell is 3.7v and the maximum charging cut off voltage is 4.2v per cell.
Approved for use
2 x 3.7v Li-ION 18650 cells (7.4v using supplied tray)
2 x 3.7v Li-ION 21700 cells (Assembled as 7.4v 2s Battery pack)
2 x 3.7v Lithium-polymere cells (Assembled as 7.4v 2s Battery pack)
DO NOT use
3.6v Li-ION cells
2S 6.6v LiFE Battery packs
LiFEP04 cells
WARNING!
Do not use 2s 6.6v LiFE battery pack, 18650 lithium-ion cells with a nominal voltage of 3.6v or LiFEP04 18650
Round cells. Using the built in USB charger with incorrect battery types and voltage may cause damage to the
remote control or fire.
Check the health and condition of the batteries regularly. Do not use damaged cells. Never charge your
device unattended. Always charge in a safe area away from flammable materials. If the remote control
gets wet or damaged in any way, do not charge it.
RadioMaster is not responsible for any adverse consequences caused by using or misusing this device.
Specifications.
Size: 183*212*66 mm
Weight: 736g
Voltage: DC7-8.4V
Battery: 2 x 18650 (tray supplied) or 2S lipo (batteries not included)
Current: 400mah (excluding external module)
Channel: 16ch
External Micro SD slot: Card Included
2 x External UART Expansion Ports
Support.