Do you have a question about the RadioMaster Zorro and is the answer not in the manual?
Gimbals | Hall sensor gimbals |
---|---|
Operating System | EdgeTX |
Number of Channels | 16 |
USB Port | USB-C |
MCU | STM32 |
Firmware | EdgeTX |
Charging | USB-C charging |
Transmitter Type | Handheld |
Weight | 350g (without batteries) |
Telemetry | Yes |
Voice Alerts | Yes |
Haptic Feedback | Yes |
SD Card Slot | Yes |
Protocol | CC2500, CYRF6936, A7105, NRF24L01 |
Display | 128x64 monochrome LCD |
RF | Internal multi-protocol module |
Internal RF Module | 4-in-1 multi-protocol module |
External Module Bay | Nano module bay |
Compatibility | Compatible with most popular protocols |
Power Supply | 2x 18650 Li-ion batteries (not included) |
Welcome message and purpose of the instruction manual.
Critical safety guidelines for operating the radio system and models.
Identification of physical components and controls on the radio.
Details on battery type, voltage, and charging procedures.
Sources for obtaining the latest manual and firmware updates.
Technical details, dimensions, and performance characteristics of the radio.
Information on product warranty coverage and contact for repairs.
Legal notice regarding software usage and user responsibility.
Licensing information and copyright notices for the firmware.
Explains common warnings like throttle, switch, and failsafe status during power-on.
Step-by-step guide for calibrating the gimbal sensors for accurate input.
Configuration of gimbal mode (Mode 1/2) and channel output sequence (AETR).
Overview of primary display screens, including system status and reset options.
Configuration of tools, SD card, radio setup, global functions, trainer, hardware, and version.
Process for choosing, creating, editing, or deleting flight models.
Detailed setup for flight modes, variables, inputs, mixers, outputs, curves, logic switches, telemetry, and display.
Guides for binding radio protocols and updating RF module firmware.