Global var, another global variable
Inc / Decrement: increase or decrease
Select a knob or slider to adjust the volume
Use the switch to set the receiver's runaway protection anytime,
anywhere
Play a sound
! 1x: Play sound once, not at startup
1x: Play sound once.
1s-60s: broadcast at intervals (seconds)
Play wav file in SD card, single broadcast and loop broadcast are the same
as above
Voice broadcast value, can broadcast values from any source, such as real-
time values such as gimbal, voltage, altitude, time, etc.
Call the specified script, and the script file should be placed in the /
SCRIPTS / FUNCTIONS / folder of the SD card.
Background music, loop play wav files, take effect immediately after
power on
Start recording logs, save on SD card, can set time interval 0.2-25.5
seconds
To control the brightness of the backlight, you must first define the
backlight ON and OFF brightness in the system settings. This uses the
switch to switch the corresponding ON and OFF brightness of the
backlight.
Take a screenshot of what is displayed on-screen
3.4.10. Digital Transmission and Telemetry
Each value received via digital transmission is considered a separate sensor with its own
properties. Multiple identical sensor types can be connected, but the physical ID must be
changed. For example, a sensor for each battery in a 2-6S lithium battery, or monitoring
To Next Page
Loading...
