RADLEY Mya 4 - Default Chapter; Table of Contents

Mya 4 Reaction Station – Instructions
Issue 8 Page: 2
Contents
1 Introduction 5
2 Mya 4 Standard Warranty 6
2.1 Mya 4 Warranty Exclusions 7
3 Safety information 8
4 Important warnings 9
5 Component guide 10
6 Set-up and operation 11
6.1 Requirements 11
6.2 Getting started 11
6.3 Set-up overview 11
6.3.1 Connecting the Reaction Station to the mains power and the Control Pad 12
6.4 Coolant supply 13
6.4.1 Connecting the coolant supply to the Reaction Station 13
6.4.2 Optimising cooling performance 15
6.5 Internal gas purge 17
6.5.1 Connecting to the internal gas purge 17
6.6 Internal drain 19
6.6.1 Connecting to the internal drain 19
6.7 Reflux & Manifold Heads 20
6.7.1 Attaching the Reflux Head to the Reaction Station 22
6.7.2 Connecting the coolant supply to the Reflux Head 24
6.7.3 Connecting a single coolant supply to the Reaction Station and Reflux Head 26
6.7.4 Connecting the gas/vacuum supply to the Reflux Head 33
6.7.5 Important tips for optimum refluxing 36
6.7.6 Attaching the Manifold Head to the Reaction Station 37
6.7.7 Connecting the coolant supply to the Manifold Head 39
6.7.8 Connecting a single coolant supply to the Reaction Station and Manifold Head 41
6.7.9 Connecting the gas/vacuum supply to the Manifold Head 49