Need help?Do you have a question about the RADLEY Mya 4 and is the answer not in the manual?
Lists items and conditions not covered by the Mya 4 standard warranty.
Lists the necessary items and services for Mya 4 operation.
Initial steps for unpacking and positioning the Mya 4 unit.
Step-by-step instructions for connecting the Mya 4 system components.
Details on connecting and managing the Mya 4's liquid coolant supply.
Information on connecting an inert gas supply for internal component protection.
Instructions for connecting the internal drain for leak management.
Information on attaching and using Reflux and Manifold Heads.
Describes the magnetic and overhead stirring capabilities of the Mya 4.
Details the range of reaction vessels compatible with the Mya 4.
Explains the different types of inserts for reaction vessels and their use.
Details accessories for connecting vessels to Reflux/Manifold Heads.
Instructions for using Mya Compact Stirrers with the Mya 4 system.
Information on connecting and using external temperature probes for precise control.
Steps for connecting and preparing the Mya 4 Control Pad for use.
How to interact with the touch-screen interface of the Control Pad.
Explains the summary view of all four zones on the Control Pad.
Introduces the individual screens for detailed control of each Mya 4 zone.
Guides for managing experiment files on the Mya 4 system.
Configuration options for system-wide settings like storage and network.
Details the chemical resistance of the Mya 4's external and internal components.
Covers electrical supply requirements and safety measures for the Mya 4.
Explains how temperature sensors and controls ensure safe operation.
Information on Printed Circuit Board thermal sensors and safety cut-outs.
Describes the sensors monitoring block temperature and associated safety limits.
Details sensors for monitoring coolant temperature and safety cut-outs.
Explains sensors for monitoring and controlling reaction temperature.
Describes the safety feature limiting temperature difference between block and reaction.
Methods to reduce temperature overshoots during heating or cooling cycles.
Describes four pre-set PID options for optimizing temperature control.
Instructions for creating ramped profiles to improve temperature control accuracy.
How to adjust the max temperature difference for better control.
Guide to manually setting custom PID values for advanced temperature control.
Explains Yellow Zone errors, indicators, and basic troubleshooting steps.
Describes Red Zone errors, their impact, and resolution.
Details Red System errors affecting all zones and the entire unit.
A reference table for error codes, likely causes, and resolutions.
Specifies coolant requirements, flow rates, and pressure limits.
Lists the physical connection ports for the Mya 4 and Control Pad.
Lists the materials used for various components of the Mya 4 system.
Specifies the Ingress Protection (IP) rating of the unit.
Provides the physical dimensions of the Reaction Station and Control Pad.
Lists the weights of the Mya 4 Reaction Station and its main accessories.
General| Brand | RADLEY |
|---|---|
| Model | Mya 4 |
| Category | Laboratory Equipment |
| Language | English |
To Next Page