• Ambient relative humidity should not exceed 80% in the temperature up to
31
°
C, and decrease linearly to 50 % of relative humidity in temperature
40
°
C,
• A moisture analyzer should be located on a stable wall console desk or a
stable working table which is not affected by vibrations and distant from
heat sources,
• Take special safety measures when weighing magnetic objects, as part of
the balance is a strong magnet.
4.2. Unpacking
Carefully remove the moisture analyzer from its packaging, remove the plastic
and foil transport protective elements. Gently place the moisture analyzer in its
intended place of use.
Assembly the components of drying chamber, following guidelines from below
figure:
Assembling moisture analyzer components:
- Assembly insert of the drying
chamber’s basis
- Assembly drying chamber
cover,
- Assembly drying pan handle,
- Assembly drying pan bracket,
- Assembly the disposable drying
pan.
Setting drying pan’s supporter (bracket).
To Next Page
Loading...
Need help?
General
