14. DRYING PROCESS WITH USE OF SHORTENED MENU
Menu of drying mode enables setting the following parameters:
- means of drying process finish mode,
- drying mode for carrying out the drying process,
- type of displayed measurement result.
In order to start drying process with use of shortened menu, disable access to
libraries of drying programs – go to menu – P6-01 Libr.
In order to change parameter settings, enter the drying menu by pressing Test
menu key. Marker of submenu group drying process finish mode starts flashing.
Then, using Right navigating key enable menu of changing settings of this
parameter group. Use navigating keys Up and Down to set one of available options
and accept changes (by double pressing of Print/Enter key) or continue parameter
settings (single pressing of Print/Enter key).
To Next Page
Loading...