14.1. Setting means of finish mode
Parameter finish mode can take the following values:
1 – automatic finish (mass change 1mg / in 10s time)
2 – automatic finish (mass change 1mg / in 25s time)
3 – automatic finish (mass change 1mg / in 60s time)
4 – automatic finish (mass change 1mg / in 90s time)
5 – automatic finish (mass change 1mg / in 120s time)
- manual finish (on pressing Start/Stop key)
- time defined (max time setting 9 hours 59 minutes):
To Next Page
Loading...