6. CONNECTING PERIPHERALS
1 Vent
2 Power cord
3 Platform
4 USB connector
5 RS232 (1) connector
6 Universal socket or gland (RS232 (2) or RS485 or Ethernet or IN/OUT)
7. CLEANING AND MAINTENANCE
7.1. Notes and Warnings
Prior to cleaning it is necessary to
disconnect the scale from the mains.
Unplug the connector from the
electrical socket.
For cleaning use only soft cloths made
of microfiber. Do not use any abrasive
cloths or any material that may scratch
the surface!
Apply the cleanser onto the cloth first.
Avoid applying the cleanser directly
onto the device!
To Next Page
Loading...
