7.2. Cleaning Tips
Avoid using aggressive cleaning
agents (e.g. solvents, cleansers
containing chlorine, corrosive
substances or bleach).
• Clean plastic components using a soft cloth slightly moistened with a solution of water and a mild detergent
(e.g. soap or dishwashing liquid).
• Dry cleaned elements using soft and dry cloth or use dust-free paper towel to absorb the remaining moisture.
• Do not install the components until they are completely dry.
Do not use cleansers containing
abrasive substances or scouring
preparations.
Make sure that no dust or liquid
enters the sockets and the inside
of the indicator.
www.radwag.com
To Previous Page
Loading...
